Skip to content
Phone / WeChat: +86 156 5512 0770 Email: pengry@qq.com

Aluminium Profiles for Windows, Doors and Facades

We select profile systems to fit a specific opening and task: casement and sliding series, thermal-break systems, facade and industrial profiles. Inquiries are accepted in English; the commercial proposal is prepared to your technical brief.

Anhui Xusu Aluminium is a manufacturer of aluminium profiles based in China, Anhui Province.

Direct contact with a manager · Work from drawings and technical briefs · Inquiries accepted in English

Modern building facade with aluminium curtain-wall glazing
Illustration: aluminium profile in facade glazing (schematic)

An aluminium profile is a long product of constant cross-section made by extrusion: a heated billet is pushed through a die, the profile is cut to length and given a protective and decorative finish. Thanks to low weight, corrosion resistance and the ability to form complex cross-sections, aluminium profiles are used in glazed structures — windows, doors, curtain walls and facade glazing — as well as in industrial frames and assemblies. The cross-section is set by the die, so a system configuration is selected for a specific structure rather than a 'standard' profile.

What we handle

  • Windows and doors of residential and commercial buildings: casement, tilt-and-turn and sliding systems, including thermal-break profiles.
  • Facade glazing and entrance systems: curtain-wall and facade profiles, profiles for entrance doors.
  • Industrial and universal profiles: frames, rails, guides and assembly components to the customer's drawings.
  • Surface finishing: anodizing and powder coating; colour and texture agreed with you.
  • Configuration to suit your opening: opening method, presence of a thermal break, compatibility of hardware and insulated glass units.

Profile system catalogue

Samples of thermal-break aluminium profile cross-sections

Thermal-break profiles, casement systems

For heated spaces where the envelope must meet thermal-insulation requirements.

Open system page
Samples of thermal-break sliding system profiles

Thermal-break profiles, sliding systems

For wide openings where sashes must not take up floor space.

Open system page
Samples of casement aluminium profiles without a thermal break

Casement systems without a thermal break

For internal and unheated structures.

Open system page
Samples of sliding system profiles without a thermal break

Sliding systems without a thermal break

For partitions, vestibules and light glazed structures.

Open system page
Mullion-and-transom node of facade glazing

Facade and curtain-wall profiles

For curtain-wall glazing, curtain walls and entrance systems of buildings.

Open system page
Industrial and universal aluminium profiles

Industrial and universal profile

For frames, rails and guides to the customer's drawings.

Open system page

Series, sizes and item numbers are confirmed by the manager on request: we do not publish a catalogue with fixed items and agree the configuration to your project.

How we work with an inquiry

  1. You describe the task: structure type, purpose of the building, opening method, preferred surface finish, approximate volume and a drawing or sketch if available.
  2. The manager clarifies the details by phone, in WeChat or by email — in English.
  3. We select a suitable profile system and agree the configuration, colour and finish with you.
  4. We prepare a commercial proposal; price, terms and delivery times are set there, not on the website.

The site deliberately lists no fixed prices, minimum volumes or lead times: they depend on the configuration and are calculated individually.

Direct contact with the manufacturer

Anhui Xusu Aluminium is based in China, Anhui Province. You contact the manufacturer's manager directly, without intermediaries: a question about the profile cross-section, hardware compatibility or finish is settled in one correspondence. We accept technical briefs and drawings, agree samples and follow the inquiry from first contact to delivery of the commercial proposal. Company details and supporting documents are provided on request.

Reference materials

Aluminium profile extrusion line

Technology of aluminium profile extrusion

How a billet becomes a profile of a given cross-section: die, pressing, cooling, cutting and finishing. The material helps you formulate a technical brief for a non-standard cross-section and understand what data the manager needs.

Read the material
Samples of aluminium profile surface finishing

Anodizing and powder coating: what is the difference

Two common surface-finishing methods: how they work, how they differ in appearance and when each is appropriate. The material helps you decide on the finish before requesting a quote.

Read the material
Various cross-sections of aluminium profiles

How to choose an aluminium profile for a window, door or facade

Selection criteria: opening method, thermal break, application, finish and hardware compatibility. The article ends with a list of data to give the manager.

Read the material

Frequently asked questions

Can you manufacture a profile to our drawing?

Yes, we review customer technical briefs and drawings. The manager confirms whether a specific cross-section can be made once the configuration is agreed.

Which surface finishes are available?

We discuss anodizing and powder coating. The exact colour, texture and finish are agreed on request; samples are provided on request.

Where are prices and delivery times listed?

We do not publish fixed prices, minimum batches or lead times: they depend on the configuration and volume. The manager will prepare a commercial proposal once the task is clarified.

Let us discuss your project

Describe the structure and the conditions of the task in your inquiry — that is enough to start the selection. If it is more convenient to call, the number is in the 'Contact' section and at the bottom of every page.

Discuss your project: describe your task and our manager will prepare a commercial proposal.