How to Choose an Aluminium Profile for a Window, Door or Facade

Selecting a profile system rarely comes down to a single parameter: opening method, presence of a thermal break, finish and hardware compatibility are interrelated, and a decision on one item changes the requirements for the others. This material gives a sequence of questions that helps you formulate a technical brief and pass the manufacturer the data needed for a quote straight away. There are no numerical specifications or prices here.
Choosing an aluminium profile is the step-by-step clarification of six structure parameters: application, opening method, presence of a thermal break, surface finish, hardware compatibility and the initial data on volume and drawings. This order is convenient because each next question builds on a decision already made rather than revisiting the previous one.
Six steps of selection
Step 1. Application
Determine exactly what you are specifying: a window, door, curtain wall, facade glazing or frame. This determines the frame type and the set of system elements. For facade and curtain-wall structures see the section on facade profiles; for rails and frames see the section on industrial profiles.
Step 2. Opening method
Casement, tilt-and-turn or sliding opening sets the configuration of sashes and hardware. Sliding systems are appropriate where floor area cannot be lost when opening; casement systems where a familiar ventilation pattern and a tight closure matter.
Step 3. Whether a thermal break is needed
If the structure separates a heated envelope from the outside environment, consider a thermal-break profile. For internal partitions, vestibules and unheated premises a solid profile without a separating insert is enough. You cannot move from a 'cold' series to a 'warm' one within one agreed configuration: the system is selected anew.
Step 4. Surface finish
Decide whether you need a metallic texture (anodizing) or a coloured finish (powder coating) and agree colour, texture and gloss level. For structures whose inner and outer faces look different, discuss different face finishes before the quote.
Step 5. Hardware and insulated glass compatibility
Gaskets, hardware and the insulated glass unit are selected together with the profile, not separately. If you already have a specification or project documentation, pass it on: this noticeably reduces the number of clarifying questions.
Step 6. Drawings, volume and supply terms
State the approximate volume, whether a drawing or sketch is available and a convenient contact method. Cost, lead times and supply terms are calculated for the configuration and set out in the commercial proposal, not in a general description.

Common mistakes in selection
- Choosing a profile by the look of the cross-section alone, without clarifying the opening method.
- Agreeing a 'cold' series first and then requesting envelope insulation.
- Not mentioning the finish before the quote: the coating affects the configuration and supply terms.
- Sending a drawing without a description of the node in which the profile will be used.
- Expecting fixed prices and lead times from a general description: they are calculated for a specific volume and configuration.
Data to send with your inquiry
- Structure type and opening method.
- Whether a thermal break is required.
- Surface finish, colour and texture.
- Approximate volume and whether a drawing or sketch is available.
- Contact for the reply and a convenient contact method.
You do not need all points at once: the manager will clarify what is missing in correspondence. The main thing is to describe the task rather than select an item number yourself.
What this material does not contain
We do not give alloy grades, sizes, wall thicknesses, tolerances, coating classes, prices, minimum batches or delivery times. The material is for reference and does not replace agreeing the configuration with the manager and the commercial proposal.
Frequently asked questions
Thermal break or 'cold' profile — which to choose?
If the structure separates a heated envelope from the outside environment, consider a thermal-break system. For internal and unheated structures a solid profile is enough. The final choice is confirmed by the manager from your description of the project.
Which profile do I need for a window?
It depends on the opening method and insulation requirements: casement and tilt-and-turn systems come with and without a thermal break. Describe the opening and the manager will select a configuration.
Can I select a profile from a catalogue without consultation?
There is no catalogue with fixed item numbers on the site: the configuration is agreed to your project. Send a description of the structure or a specification and the manager will prepare a proposal.
Profile system catalogue
- Thermal-break profiles, casement systems
- Thermal-break profiles, sliding systems
- Casement systems without a thermal break
- Sliding systems without a thermal break
- Facade and curtain-wall profiles
- Industrial and universal profile
Reference materials
Send us the task — we will select the system
Describe the structure using the six points above or send a specification: the manager will agree the configuration and prepare a commercial proposal.
Request a selection consultationBrowse the profile catalogue