Skip to content
Phone / WeChat: +86 156 5512 0770 Email: pengry@qq.com

Industrial and Universal Profiles Made to Your Drawing

Industrial and universal profiles are used not in glazed structures but in load-bearing and assembly elements: frames, rails, guides, workbenches and equipment enclosures. Here the priority is the cross-section geometry and the way elements are joined, rather than the opening method. This page describes typical applications, manufacturing technology, finishing and the procedure for requesting manufacture to your drawing.

An industrial aluminium profile is a profile product used as a structural element of frames, rails and assembly nodes; its cross-section is set by the die during extrusion and selected to suit the joining method and the load in a specific node. It is called universal because the same frame can be used in different assemblies with compatible connecting elements. We do not give sizes, slots, alloy grades or design loads here: they are determined by the configuration and confirmed on request.

Industrial aluminium profiles: tubes, angles and T-profiles
Schematic of a profile system

Request a selection consultationBack to catalogue

Where it is used

  • Frames and rails of equipment, workbenches and workstations.
  • Guides and support elements of assembly nodes.
  • Enclosures and protective frames around process areas.
  • Frames for mounted panels, signage and light structures.
  • Elements manufactured to customer drawings and sketches.

Section selection starts with a description of the node: how the elements are joined and what requirements apply to rigidity and appearance.

Material and technology

The profile is made by extrusion: a heated billet is pushed through a die with an opening of the required cross-section, then the profile is cooled, straightened, cut to length and, if needed, sent for additional machining and finishing. The cross-section geometry is set entirely by the die, so when working to a customer drawing a sketch is agreed first, then manufacturability is assessed and only then is the batch discussed. Elements in a node may be joined mechanically using compatible fasteners and connectors; the specific method is agreed for your assembly. Numerical cross-section parameters, tolerances and alloy grades are not given on the page.

Typical cross-section drawing of universal aluminium profiles
Typical cross-section drawing with original marking (illustration)

Technology of aluminium profile extrusion

Surface finishing options

We discuss anodizing and powder coating. Anodizing forms a protective oxide layer and keeps the metallic texture; powder coating allows the colour to be matched to other elements of the equipment or room. For industrial frames the finish is often chosen for the operating conditions, so colour, texture and finish are clarified before the commercial proposal is prepared. Samples and the list of available finishes are provided on request.

How to request manufacture to a drawing

Send a drawing or sketch of the cross-section, a description of the node in which the profile will be used, the approximate volume and finishing requirements. The manager will clarify the geometry, agree the joining method and confirm manufacturability, then prepare a commercial proposal. If you do not have a drawing yet, a description of the task is enough — the sketch can be provided at the next step. Samples, supply terms, lead times and minimum batches are confirmed on request; there are no fixed prices or item numbers on the site.

Send your drawing — we will confirm manufacturability and prepare a quote.

Send a drawing for approvalBack to catalogue

Frequently asked questions

Can you manufacture a profile to our drawing?

Yes, customer technical briefs and drawings are reviewed. The manager confirms whether a specific cross-section can be made after the sketch and configuration are agreed.

Which joining methods are used?

We discuss mechanical joining with compatible fasteners and connecting elements; the specific method is selected for your node and confirmed by the manager.

How do I find out the cost and lead time?

They depend on the cross-section, finish and batch volume and are set out in the commercial proposal. Send a drawing or a description of the node and the manager will prepare a quote.

Other profile series

Request a quote for this system

Our manager will clarify the configuration and prepare a commercial proposal for your project.

System: Industrial and universal profile

Prepare inquiry emailOpen the full form

Phone / WeChat: +86 156 5512 0770 · Email: pengry@qq.com

Discuss your project: describe your task and our manager will prepare a commercial proposal.

Call: +86 156 5512 0770Email: pengry@qq.comSend an inquiry