Skip to content
Phone / WeChat: +86 156 5512 0770 Email: pengry@qq.com

Thermal-Break Casement Systems for Windows and Doors

Thermal-break casement and tilt-and-turn systems are used where a glazed structure must meet thermal-insulation requirements. Below we describe how such a profile is built, where it is appropriate, which finishing options are discussed and how to request a configuration matched to your opening. Numerical specifications and item numbers are not given on this page: they are determined by the specific series and confirmed by the manager.

A thermal break (thermal bridge) is a polymer insert that separates the inner and outer parts of an aluminium profile and interrupts direct heat transfer through the metal. A thermal-break profile consists of two aluminium parts joined by this insert, so the frame conducts less heat than a solid metal profile and the inner surface stays closer to room temperature. A thermal break does not change the opening method: both casement and tilt-and-turn sashes are used with it.

Samples of thermal-break aluminium profile cross-sections
Schematic of a profile system

Request a selection consultationBack to catalogue

Where it is used

  • Windows and balcony doors of heated residential and commercial premises.
  • Entrance systems whose envelope must meet thermal-insulation requirements.
  • Projects where casement or tilt-and-turn opening must be kept while using a 'warm' series.
  • Renovation and replacement of glazed structures with the existing openings retained.

Suitability for a specific project — climate, glazing type and project requirements — is confirmed by the manager after the initial data is agreed.

Material and technology

The system is based on an aluminium profile made by extrusion: a heated billet is pushed through a die, the resulting profile is cut to length and sent for surface finishing. The two profile parts are joined by a polymer thermal insert; the frame also includes gaskets, hardware and an insulated glass unit, whose compatibility is checked during configuration. The cross-section is set by the die, so when working to a customer drawing a sketch is agreed first and only then is manufacturability confirmed. We do not give alloy grades, wall thicknesses, tolerances or numerical figures here: they are determined by the specific series and confirmed on request.

Typical cross-section drawing of thermal-break casement system profiles
Typical cross-section drawing with original marking (illustration)

Technology of aluminium profile extrusion

Surface finishing options

We discuss anodizing and powder coating. Anodizing forms a protective oxide layer on the surface; powder coating applies a polymer finish with an agreed colour and texture. The inner and outer faces of the profile may be finished differently — the manager confirms this option. Colour, gloss level, finish samples and the list of available finishes are agreed before the commercial proposal is prepared; there is no fixed list of shades on the site.

How to request a selection

Describe the structure type, opening method, opening dimensions, finishing requirements and approximate volume. If you have a drawing or sketch, attach it to the inquiry. The manager will clarify the details, agree the configuration and prepare a commercial proposal. Manufacture to customer drawings, sample availability, supply terms and lead times are confirmed on request; the site does not publish fixed prices, minimum batches or item numbers. If your project needs supporting documents for the system, state this in your email.

Describe your opening — we will match a thermal-break configuration.

Request a selection consultationBack to catalogue

Frequently asked questions

How does a thermal-break profile differ from a standard one?

Its inner and outer aluminium parts are separated by a polymer insert that interrupts direct heat transfer through the metal. A profile without a thermal break (the 'cold' series) has no such separator.

Is this system suitable for tilt-and-turn opening?

Yes, thermal-break systems are used with both casement and tilt-and-turn opening. The specific configuration and compatible hardware are confirmed by the manager for your opening.

Can I order a non-standard coating colour?

Colour and texture are agreed on request. We do not publish a fixed list of shades or references to colour catalogues.

Other profile series

Request a quote for this system

Our manager will clarify the configuration and prepare a commercial proposal for your project.

System: Thermal-break casement systems for windows and doors

Prepare inquiry emailOpen the full form

Phone / WeChat: +86 156 5512 0770 · Email: pengry@qq.com

Discuss your project: describe your task and our manager will prepare a commercial proposal.

Call: +86 156 5512 0770Email: pengry@qq.comSend an inquiry